- ²úÆ·ÏêÇé
ͨÓøßѹ±ÈÀýDC/DC±ä»»Æ÷
Ìصã:
¡¤ ÕâЩDC/DCת»»Æ÷ÊdzɱÈÀýµÄ:Êä³öµçѹÓëÊäÈëµçѹ³É±ÈÀý
¡¤ ¹¤×÷ζȷ¶Î§:-40/+70¡æ£¬ÎÞ½µ¶î£¬ÎÞÉ¢ÈÈÆ÷
¡¤ ¸ôÀë:ÎÞ£¬Êä³ö0VÊä³ö½ÓµØ
¡¤ ÖØÁ¿:Ô¼350g
¡¤ ÆÁ±ÎÖýÂÁÍâ¿Ç
¡¤ ά¶È:L110xW63xH32mm
¡¤ ÓÅÒìµÄTC: 0.1%/¡ãC
¡¤ ¸ºÔØÎȶ¨ÐÔ:5%
¡¤ µÍÎƲ¨(<0.3%)
¡¤ ·ûºÏRoHS±ê×¼µÄ²úÆ·
¡¤ ·â×°ÔÚULÊ÷Ö¬ÖÐ
¡¤ ¸ßѹ¼àÊÓÆ÷Êä³ö
¶©¹ºÐÅÏ¢£º
M10P2.5: +10kV
M10N2.5: -10kV
| Parameters | Specifications (at Tamb=25¡æ unlessotherwise specified) |
| Input voltage Vin | From 0.7 to 24Vdc |
| Maximum output voltage | 10kV |
| Full load o/p voltage tolerance | ¡À5% |
| Polarity | Fixed,positive or negative,depends on the model |
| Nominal output current | 250¦ÌA |
| Typical Full load input current | ~200mA |
| Full load output ripple | 0.01%V/V |
| Typical frequency | ~100kHz |
| Output short circuit protection | Yes,permanent.Output short circuit current~1.5mA |
| Monitor output (yellow wire) | 1000:1,Zout=136kQ |
| Input reverse voltageprotection | None! |
| Voltage change No Load/Full Load | <+5%Typical (seegraph) |
| 0/p voltage Temperature Coefficient | 1000ppm/¡ã¡æ over the operating temperature range |
| Isolation Input/output | None,the OV output is internally connected to OV input |
| Operating temperature range | 0¡æto+70¡æ ambient |
| Storage temperature range | -40¡ã¡æto +85¡æ |
